System Startup - Clevo W270BUQ Series Service Manual

Preface
Related Documents
You may also need to consult the following manual for additional information:
User's Manual on CD/DVD
This describes the notebook PC's features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the left of the
computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle (do
not exceed 130 degrees); use the other hand (as illustrated in
Figure
computer by the lid/LCD).
7. Press the power button to turn the computer "on".
VIII
1) to support the base of the computer (Note: Never lift the
130
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In

Shut Down
Note that you should al-
ways shut your com-
puter down
ﾟ
choosing Shut Down
from the Start Menu.
This will help prevent
hard disk or system
problems.
by