System Startup - Clevo N870 User Manual

System Startup

1. Remove all packing materials, and place the computer on a stable surface, and securely attach any peripherals you want to
use with the notebook (e.g. keyboard and mouse) to their ports.
2. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter (make sure you use the adapter when first setting up the computer, as
to safeguard the computer during shipping, the battery will be locked to not power the system until first connected to the AC/
DC adapter).
3. Use one hand to raise the lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees); use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
4.
Press the power button on the top of the computer for about 2 - 3 seconds to turn the computer "on" (note that the power
LED on the front of the computer will turn from orange to green when the computer powers on).
135°
135°
Figure 1 - 1 - AC/DC Adapter In / Opening the Lid/LCD
Quick Start Guide

Shutdown
Note that you should
always shut your
computer down by
choosing the Shut
Down command in
Windows (see page
1 - 48). This will help
prevent hard disk or
system problems.
System Startup 1 - 5
1