Table of Contents
Advertisement
Modules
6
6 - 16 Setting Up SATA RAID, Optane™ or AHCI Mode
Intel® Optane™ Setup Procedure
After initial setup make sure you install the Intel Rapid Storage Technology driver
- see
"IRST Driver Installation" on page 6 -
See also
"Clearing Intel® Optane™" on page 6 - 20
essary files and data before deleting an Optane setup, as doing so will result in the
loss of all data on the volumes).
You need to setup Intel
system, and you will need to prepare the following in order to do so.
==========================================================
• The Microsoft Windows 10 OS DVD.
• An attached external DVD drive.
• An Intel® Optane™ SSD installed in your system.
• The Device Drivers & Utilities + User's Manual disc.
==========================================================
6.
Start-up your notebook computer and press <F2> to enter the BIOS.
7.
Go to the Boot menu, select UEFI Setting and press <Enter> (see page
8.
Set UEFI Boot to "Enabled".
9.
Press <Esc> to exit the menu and go to the Main menu.
10. Select OffBoard NVMe Controller Configuration and press enter to check that
an Intel® Optane™ SSD is present.
11. Press <Esc> to exit the menu and go to the Advanced menu.
41).
Optane
before installing your Windows 10 operating
™
®
(however backup up any nec-
5 -
17).
Hide quick links:
Advertisement
Table of Contents
