Power-Saving States; Sleep - Clevo NB55TK1 User Manual

Power-Saving States

You can use power-saving states to stop the computer's operation and restart where
you left off. Windows 10 uses the Sleep, Hibernate and Shut Down power-saving
states.

Sleep

In Sleep all of your work, settings and preferences are saved to memory before the
system sleeps. When you are not using your computer for a certain length of time,
which you specify in the operating system, it will enter Sleep to save power.
The PC wakes from Sleep within seconds and will return you to where you last left
off (what was on your desktop) without reopening the application(s) and file(s) you
last used.
If your mobile PC in Sleep is running on battery power the system will use only a
minimum amount of power. After an extended period the system will save all the
information to the hard disk and shut the computer down before the battery becomes
depleted.
To add Sleep to the Power Menu see
Menu" on page 4 - 10.
"Adding Hibernate/Sleep to the Power
Power Management

Wake On LAN
Support
Wake-On-LAN is only
supported from Sleep or
Hibernate states
Windows.
If you require your com-
puter to wake up from
network activity in Win-
dows then make sure
that the computer is ei-
ther in Sleep or Hiber-
nate.
Wake-On-LAN
supported from Shut-
down states in Win-
dows.
Power-Saving States 4 - 7
4
in
is not