System Startup - Clevo P150EM Concise User Manual

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and tighten the screws.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing
angle (do not to exceed 135 degrees); use the other hand (as
illustrated in Figure 1) to support the base of the computer
(Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer "on".
4
135
ﾟ
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
Model Differences
This notebook series includes three different model types
that mainly differ as indicated in the table below.
Feature Model A
Video Adapt-
See Specifications on page 34
ers Supported video adapters supported by each model.
15.6" (39.62cm) FHD (1920 *
Display Type
Illuminated
Yes
Keyboard
RAID Not Supported
AC/DC 19V, 9.47A
Adapter
(180W)
Table 1 - Model Differences
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
Model B Model C
for a full list of
17.3"
(43.94cm)
1080) FHD (1920 *
1080)
No Yes
RAID Level 0/
1/Recovery
Supported
19V, 6.3A 19V, 11.57A
(120W) (220W)