Clevo NB55TK1 User Manual page 151

23. The RAID volume will then be created and the RAID information will be displayed
under Intel(R) Rapid Storage Technology (in the Advanced menu).
24. Press <Esc> to exit the menu.
25. Press <F4> and <Yes> to "Save Changes and Reset", however ensure that the
condition in the bulleted points below are met before doing so.
• Make sure the Windows 10 OS DVD is in the attached DVD drive, as the com-
puter starts up it will automatically boot from the Windows 10 OS DVD (you
will be prompted to press a key to boot from the DVD).
• Make sure your USB Flash drive is attached to one of the computer's USB
ports.
Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 9
Modules
Figure 6 - 4
Created RAID
Information
(Advanced > Intel(R)
Rapid Storage
Technology)
6