Clevo NB55TK1 User Manual page 159

12. Select SATA Mode (see page
Premium...".
13. Press <F4> and <Yes> to "Save Changes and Reset".
14. As the computer restarts press <F2> to enter the BIOS again.
15. Go to Intel(R) Rapid Storage Technology (Advanced menu) and press <Enter>.
16. . (Note this item only appears after you have restarted and accessed the BIOS
again after having set SATA Mode to Intel RST Premium.)
17. If you are reinstalling a system that has previously been setup in Intel RST
Premium mode, make sure you have cleared the Intel Optane Memory (see
"Clearing Intel® Optane™" on page 6 -
5 - 11), press <Enter> and select "Intel RST
20).
Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 17
Modules
Figure 6 - 8
SATA Mode
Selection (BIOS)
Figure 6 - 9
Intel(R) Rapid
Storage Technology
(Advanced Menu)
6