Important Instrument Settings; Switch On The Heater; Set The Processing Interval; Set The Display Contrast - Hach SIGMATAX 2 User Manual

5.3

Important instrument settings

5.3.1

Switch on the heater

5.3.2

Set the processing interval

5.3.3

Set the display contrast

5.3.4

Switch on the pressure display

1. Press one of the function keys, F1 to F4, for 3 seconds.
2. Open the +SETTINGS menu by pressing F2.
3. Press F4 to scroll to the [heating] menu item
4. Select this menu item by pressing F2.
5. Switch the heater on or off by pressing F3 or F4.
6. Confirm by pressing F2 and exit this menu level by pressing F1.
1. Press one of the function keys, F1 to F4, for 3 seconds.
2. Open the +SETTINGS menu by pressing F2.
3. Press F4 twice to scroll to the [interval] menu item.
4. Select this menu item by pressing F2.
5. Set the desired interval by pressing F3 and F4.
6. Confirm by pressing F2 and exit this menu level by pressing F1.
1. Press one of the function keys, F1 to F4, for 3 seconds.
2. Open the +SETTINGS menu by pressing F2.
3. Press F4 four times to scroll to the [contrast] menu item.
4. Select this menu item by pressing F2.
5. Set the desired contrast by pressing F3 and F4.
6. Confirm by pressing F2 and exit this menu level by pressing F1.
1. Press one of the function keys, F1 to F4, for 3 seconds.
2. Open the +SETTINGS menu by pressing F2.
3. Press F4 five times to scroll to the [press indic.] menu item.
4. Select this menu item by pressing F2.
5. Switch the pressure indicator on or off by pressing F3 or F4.
6. Confirm by pressing F2 and exit this menu level by pressing F1.
STATUS
Open the probe
Close the probe
Deliver the sample
Empty the probe
U
0 to minimum –0.5 bar
0 to minimum 1.3 bar
> 1.6 bar
0.1–0.5 bar
Operation
O
–
–
10–16
–
31