Hach SIGMATAX 2 User Manual page 15

Figure 6 Sampling probe and mounting pipe
Mounting pipe, 2 m (78.7 in)
1
EPDM flat seal
2
When carrying out an installation variant that deviates from this example, make sure that the
connection tube from the sampling probe is guided vertically upward for at least 0.5 m (19.6 in).
Installation using pole mount LZX414.00.00000
N O T I C E
Retaining clamp
3
Cylinder-head screw, M5 × 20 (3×)
4
Installation
15