Figure 64 Network Setup: Id - ABB XSeriesG4 User Manual

setup for automatic addressing, when the laptop connects to the enabled XFC Ethernet port, it automatically
configures a compatible IP address.
For additional details on the IP addressing setup for the PC or laptop click Help from the Network screen.
To enable and setup the Ethernet port:
Establish a local connection to the Entry screen as described in section 5.3, Establishing Initial Local Communication.
Connect the XFC Ethernet port to the PC or laptop Ethernet port with a crossover Ethernet cable.
Select Communications> Network tab from the navigation tree. The Network screen displays with options to
configure the Ethernet port or Network Adaptor (Figure 64).
In the Network ID value field type the Network ID.
Set Network Adaptor to Enable.
Click Send.
Click OK to confirm changes.
On the navigation tree, select Communications > Totalflow/TCP>Setup tab to view or change additional port
parameters (Figure 65). The default protocol enabled on the port is Totalflow/TCP.

Figure 64 Network Setup: ID

84 XFC G4 2103335 Rev AB