®
ABB i-bus
KNX
3.2.2
Parameter window
A: General
Commissioning
Note
In this product manual, all the current 2/4/8 and 12-fold Switch Actuators
are described. These devices each have 2/4/8 or 12 outputs. However, as
the functions for all outputs are identical, only the functions of output A will
be described.
In this parameter window, all general settings for output A are undertaken.
Operating mode of output
Options:
Switch Actuator
Heating Actuator
This parameter defines the operating mode of the output. As the parameter
and possible functions as well as other parameter windows are different for
each operating mode, we will describe them for each operating mode:
Operating mode Switch
Operating mode Heating
Actuator, from page 60
Actuator, from page 112
SA/S | 2CDC 505 056 D0207 59