For Safe Operation - Anest Iwata DVSL-100C Instruction Manual

For safe operation

Below is very important information about how to safely operate the equipment.
Before operation, be sure to read and fully understand the contents.
Danger of load collapse
Please install and move a vacuum pump
by firmly holding the glip of a pump
(DVSL-100C's gross weight: 15kg).
Be careful to install a vacuum pump as
physical damage, failure of a product and
Be careful about
body injury can be caused by dropping of
hoisting
a pump and getting caught in the gap
between a pump and the other object.
Danger of explosion, fire and
accident
Install in an area free from explosive,
flammable or corrosive substances.
If not, it can cause explosion, fire or
Install at a safe
accident.
site
Danger of electric shock and
entanglement
Be sure to turn off electric source on
building site before wiring. If not, it can
cause electric shock or bodily injury due to
turning objects.
Turn off electric
source
Danger of accident, fire or failure
Be sure to install an electric source
emergency stop switch (or protective
device that can urgently stop).
Install
If equipment is not stopped in an
emergency stop emergency, it can cause accident, fire or
failure.
switch
Danger of electric fire and electric
shock
Install motor protective circuit breaker to
protect motor.
If not, it can cause bodily injury due to
Install motor
electric fire or electric shock.
protective circuit
If you have any questions about the
selection of protective devices, contact
breaker to
either the dealer who sold it to you or us.
protect motor
WARNING
Avoid moisture
Ask qualified
electrician
Install
overcurrent
protective device
Install short
circuit protective
device
Be careful about
wiring
-2-
Danger of electric shock
Install in an area which is not exposed to
moisture such as rain or steam. If moisture
comes into and tact with the electric
source connection, it can cause fire or
bodily injury due to short-circuit or electric
shock.
Danger of short-circuit and
electric shock
Ask a qualified electrician to perform
electric wiring.
If not, short-circuit or electric shock can
cause fire or bodily injury.
Danger of accident, fire and
failure
Be sure to install protective device to
protect circuitry.
We recommend an overcurrent protective
device (rated 15A) to protect branch
circuit.
If equipment is not stopped in an
emergency, it can cause accident, fire or
failure.
Danger of fire and electric shock
Install short circuit protective device.
If not, it can cause bodily injury due to fire
or electric shock.
Danger of short-circuit and
electric shock
We recommend an electric wire of larger
2
than 2mm (more than rated 10A,) cross
section area for electric wire (including
grounding wire.).
Be careful to avoid voltage drop
considering local situation.
If not, it can cause a short-circuit fire and
may result in bodily injury from electric
shock.