Table of Contents
Advertisement
CPU to PCI Write Buffer
When this field is enabled, writes from the CPU to the PCI bus
are buffered, to compensate for the speed differences between the
CPU and PCI bus. When, disabled, the writes are not buffered
and the CPU must wait until the write is complete before starting
another write cycle.
The choices: Enabled, Disabled.
PCI Dynamic Bursting
When enabled, every write transaction goes to the write buffer.
Burstable transactions then burst on the PCI bus and
nonburstable transactions do not.
The choices: Enabled, Disabled.
PCI Master 0 WS Write
When enabled, writes to the PCI bus are executed with zero wait
states.
The choices: Enabled, Disabled.
PCI Delay Transaction
The chipset has an embedded 32 -bit posted write buffer to
support delay transactions cycles. Select enabled to support
compliance with PCI specification version 2.1.
The choices: Enabled, Disabled.
PCI#2 Access #1 Retry
When disabled, PCI#2 will be connected until access finishes
(default). When enabled, PCI#2 will be disconnected if max
retries are attempted without success.
The choices: Enabled, Disabled.
54
GENE-6310 User Manual
Advertisement
Table of Contents
