Power Connector (CN15)
In single board computer (non-passive backplane) applications,
you will need to connect the power to the Gene-6310 board using
CN15. This connector is fully compatible with the standard PC
power supply connector. Please check the following table for its
pin assignment:
Power Connector (CN15)
Pin
1
2
3
4
USB Connector (CN16, CN17)
The Gene-6310 has 4 USB (Universal Serial Bus) ports that provide
complete functions to plug, play, hot attach, or detach for up to
127 external devices. The USB interfaces comply with USB
specification Rev. 1.1 and can be disabled in the system BIOS
setup.
USB Connector (CN16, CN17)
Pin
1
3
5
7
9
Signal
Vcc
GND
GND
+12V
Function
D0VDD
D0-
D0+
GND
GND
Pin
Function
2
GND
4
GND
6
D1+
8
D1-
10
D1VDD
Chapter 2 Installation
29