Aaeon VIA Eden Series User Manual page 57

Boot Other Device
If your boot device is not included in the following choices Floppy,
LS120, HDD0, HDD1, HDD2, SCSI, CDROM, you may set First/
Second/Third Boot devices to Disable and enable the BOOT Other
Device function. The system will automatically boot the other
device.
The choices: Enabled, Disabled.
Swap Floppy Drive
This field is effective only in systems with two floppy drives.
Selecting enabled assigns physical drive B to logical drive A, and
physical drive A to logical drive B.
The choices: Enabled, Disabled.
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine
whether they have 40 or 80 tracks. Only 360-KB floppy drives
have 40 tracks; drives with 720 KB, 1.2 MB, and 1.44 MB
capacity all have 80 tracks. Because very few modern PCs have
40-track floppy drives, we recommend that you set this field to
Disabled to save time.
The choices: Enabled, Disabled.
Boot Up NumLock Status
Toggle between On or Off to control the state of the NumLock key
when the system boots. When toggled On, the numeric keypad
generates numbers instead of controlling cursor operations.
The choices: On, Off.
Gate A20 Option
Gate A20 refers to the way the system addresses memory above 1
MB (extended memory). When set to Fast, the system chipset
controls Gate A20. When set to Normal, a pin in the keyboard
controller controls Gate A20. Setting Gate A20 to Fast improves
system speed, particularly with OS/2 and Windows.
The choices: Fast, Normal.
48 GENE-6310 User Manual