Safety Devices; Residual Risks; General Safety Rules - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.
3.0

SAFETY DEVICES

• Master switch positioned on the rear of the ma-
chine
Its function is to disconnect machine electric supply.
• Protection guard
Its function is to protect the operator from possible
projections of materials on the wheel during its spin.
Wheel spinning is normally prevented if the wheel
protection guard is raised (open). When the
protection guard is open, this interrupts the cir-
cuit that triggers the motor and automatic start
is prevented, including in the case of an error.
Press stop key to stop wheel rotation in
emergency conditions.
3.1

Residual risks

The machine was subjected to a complete analysis of
risks according to reference standard EN ISO 12100.
Risks are as reduced as possible in relation with tech-
nology and product functionality.
Possible residual risks have been emphasized through
pictorial representations and warnings which placing is
indicated in " PLATE POSITIONING TABLE" at page 6.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
4.0
• Any tampering with or modification to the machine
• Removing of or tampering with the safety devices or
• Use of the machine is only permitted in places free
• Original spare parts and accessories should be used.
• Installation must be conducted only by qualified
• Ensure that there are no dangerous situations dur-
• In emergency situations and before carrying out any
• The machine electrical supply system must be
• Ensure that the work area around the machine is free
• UNDER NO CIRCUMSTANCES must the machine be

GENERAL SAFETY RULES

not previously authorized by the manufacturer ex-
empts the latter from all responsibility for damage
caused by or derived from said actions.
with the warning signals placed on the machine leads
to serious dangers and represents a transgression of
European safety rules.
from explosion or fire hazard and in dry places
under cover.
THE MANUFACTURER DENIES
ANY RESPONSIBILITY IN CASE
OF DAMAGES CAUSED BY UNAU-
THORIZED MODIFICATIONS OR
BY THE USE OF NON ORIGINAL
COMPONENTS OR EQUIPMENT.
personnel exactly according to the instructions that
are given below.
ing the machine operating manoeuvres. Immediately
stop the machine if it miss-functions and contact the
assistance service of an authorized dealer.
maintenance or repairs, disconnect all supplies to
the machine by using the main switch, placed on the
machine itself, and unplugging the power supply.
equipped with an appropriate earthing, to which
the yellow-green machine protection wire must be
connected.
of potentially dangerous objects and that there is no
oil since this could damage the tyre. Oil on the floor
is also a potential danger for the operator.
used to spin anything but vehicle wheels. Bad locking
can cause rotating parts to come loose, with potential
damage to the machine and anything in the vicinity
and injury to the operator.
1297-M007-1_R
Page 8 of 60
GB