Matching Mode - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.
Bring any spoke upwards at "12 o'clock" position and
press the button
Lead to "12 hours" the 2nd spoke. The machine will
automatically calculate the total number of spokes. If
the value shown on the screen (A) is correct, press the
button .
The machine automatically calculates weight position
in two positions hidden behind the spokes. The moni-
tor shows the amount of weight to be applied behind
the FIRST spoke and the rim will reach the position
to apply the FIRST weight.
Extract the gauge rod, and fit the FIRST weight in
the position shown by the machine, as explained in
Par. 14.5.1. Press the button
they have applied the FIRST weight and to automati-
cally position the wheel for the fitting of the 2nd weight.
The monitor shows the amount of weight to be applied
behind the SECOND spoke.
Pull out the gauge rod and fit the SECOND weight in
the position shown by the machine, as done for the
first weight.
Press the button
plied the SECOND weight and get back to the initial
situation of unbalance, before performing the "weights
hidden behind the spokes" procedure
Perform another test spin. The "weights hidden behind
spokes" procedure is completed.
Complete the operation by adding an additional weight
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
to confirm and continue.
A
to confirm that
to confirm that you have ap-
inside the rim as required by the selected mode (ALU-
S or STATIC).

14.8.4 Matching mode

The "Matching" procedure offsets strong unbalance,
reducing the weight quantity to be fitted on the wheel
to achieve balancing. This procedure permits reducing
unbalance as much as possible by offsetting the tyre
unbalance with that of the rim in any used program.
Proceed to unbalance measurement displaying by
performing a standard wheel spin.
THE MATCHING PROCEDURE CAN
BE CARRIED OUT ONLY IF THE
STATIC UNBALANCE IS > 30 G.
Once detected the unbalance values, verify that the
machine displays the ability to use the "matching" op-
tions (Fig. 46 ref. 4a).
Press button to shift to the next screen page.
Press button to enter the relevant function.
On the monitor the next screen page will be displayed:
1297-M007-1_R
Page 40 of 60
GB