Ravaglioli G3.140R Instruction Manual page 51

1297-M007-1_R
GB
Page 51 of 60
Place the gauge (Fig. 60 ref. 1) on the mandrel flange
(Fig. 60 ref. 2).
Fig. 60
The following screen will appear on the monitor to
indicate the measured values:
Fig._61
- The value next to the symbol "scale" (Fig. 61 ref. 1)
must be equal to the value positioned above the gauge
(Fig. 61 ref. 2) ± 1 mm.
- Press push button
The following screen will appear on the monitor:
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
1
2
2 1
.
- Place the gauge as shown in the following figure:
- Press push button
you see the following screen:
- Place the gauge against the mandrel in the lower part
of the it but on a smaller diameter than before as
indicated on the image on the monitor.
- Press push button
On the monitor the next screen page will be dis-
played:
RAVAGLIOLI S.p.A.
. Wait a few seconds until
.