Storing; Scrapping; Registration Plate Data; Functional Diagrams - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.

19.0 STORING

If storing for long periods disconnect the main power
supply and take measures to protect the machine from
dust build-up. Lubricate parts that could be damaged
from drying out.

20.0 SCRAPPING

When the decision is taken not to make further use of
the machine, it is advisable to make it inoperative by
removing the connection pressure hoses.
The machine is to be considered as special waste and
should be dismantled into homogeneous parts.
Dispose of it in accordance with current legislation.
Instructions for the correct management of
waste from electric and electronic equip-
ment (WEEE) according to the Italian legis-
lative decree 49/14
In order to inform the users on the correct way to
dispose the product (as required by the article 26,
paragraph 1 of the Italian legislative decree 49/14), we
communicate what follows: the meaning of the crossed
dustbin symbol reported on the equipment indicates
that the product must not be thrown among the un-
differentiated rubbish (that is to say together with the
"mixed urban waste"), but it has to be managed sepa-
rately, to let the WEEE go through special operations
for their reuse or treatment, in order to remove and
dispose safely the waste that could be dangerous for
the environment and to extract and recycle the raw
materials to be reused.
Fig. 68
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS

21.0 REGISTRATION PLATE DATA

The validity of the Conformity Declaration enclosed
to this manual is also extended to products and/or
devices the machine model object of the Conformity
Declaration can be equipped with.
Said plate must always be kept clean from grease
residues or filth generally.
WARNING: Should the plate be accidentally damaged
(removed from the machine,damaged or even par-
tially illegible) inform immediately the manufacturer.

22.0 FUNCTIONAL DIAGRAMS

Here follows a list of the machine functional diagrams.
1297-M007-1_R
Page 58 of 60
ATTENTION: DO NOT TAMPER
WITH, CARVE, CHANGE OR RE-
MOVE THE MACHINE IDENTIFI-
CATION PLATE;DO NOT COVER
IT WITH PANELS, ETC., SINCE IT
MUST ALWAYS BE VISIBLE.
GB