Fitting Of The Wheel (Gp3.140R - Gp3.140Rs) - Ravaglioli G3.140R Instruction Manual

1297-M007-1_R
GB
Page 21 of 60
7. Fit the cone (Fig. 28 ref. 3) with the narrowest part
turned towards the wheel
8. Fit the grip-ring (Fig. 28 ref. 1) in the nut (Fig. 28
ref. 2) and fasten the cone (Fig. 28 ref. 3).
THE GRIP-RING (FIG. 28 REF . 1)
MUST BE MOUNTED WITH THE
TEETH SIDE TOWARDS THE RING-
NUT (FIG. 28 REF . 2).
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
12.2 Fitting of the wheel (
Open the pneumatic mandrel by means of the special
pedal, see Fig. 29.
3
1
2
Fig. 28
1. Remove any type of foreign body from the wheel
2. Carefully choose the cone (Fig. 30 ref. 2) most suit-
3. Fit the wheel with the inner side of the rim towards
GP3.140RS)
(Fig. 30 ref. 3): pre-existing weights, stones and
mud, and make sure the mandrel (Fig. 30 ref. 1)
and the rim centring area are clean before fitting
the wheel on the mandrel.
able for the wheel to be balanced. These accessories
must be selected according to the shape of the rim.
Position the wheel (Fig. 30 ref. 3), fitting the cone
(Fig. 30 ref. 2) on the mandrel (Fig. 30 ref. 1): be
careful (otherwise this could seize) until this rests
against the support flange (Fig. 30 ref. 4).
the wheel balancer and against the cone.
RAVAGLIOLI S.p.A.
GP3.140R -
Fig. 29
Open/close
the pneumatic
mandrel
Brake the wheel