User Management - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.

15.1.3 User management

The "User Management" function is disabled on ma-
chine delivery. To enable it, proceed as described in
Para 15.1. After enabling, the icon will be displayed
on every page (Fig. 58 ref. 1).
The wheel balancers can be used simultaneously by
4 different users.
1
Press button , shown on the monitor (Fig. 58
ref. 2) or select the field (Fig. 59 ref. 1) and subse-
quently press the button
below:
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
Fig. 58
2
Fig. 59
1
to display he screen
A
B
KEY
A – Program used in the last carried out spin
B – Acquired measurements for the last carried
out spin
Press any of the available numbers on the buttons at
the bottom of the page to select the corresponding user.
The system stores the data relating to the last per-
formed spin according to the different operators. You
can recall the desired user each time the program dis-
plays the specific button (Fig. 58 ref. 2 and Fig. 59
ref. 1). The measurements stored for each user are
lost when the machine is switched off.
User management is valid for any wheel balancer
function.
TO ENABLE OR DISABLE THE
"USER MANAGEMENT" FUNCTION,
SEE PARAGRAPH 15.1. IF THE
FUNCTION IS DEACTIVATED, THE
BUTTON
1297-M007-1_R
Page 48 of 60
IS DISPLAYED.
GB