Ravaglioli G3.140R Instruction Manual page 38

RAVAGLIOLI S.p.A.
TWO SMALLER WEIGHTS (55g)
USING SPLIT PROCEDURE
Proceed to "DYNAMIC" unbalance measurement dis-
playing by performing a standard wheel spin.
Once detected the unbalance values, verify that the
machine displays the ability to use the "SPLIT" option
(Fig. 46 ref. 4a). Press button
next screen page.
Press button to enter the "SPLIT" function.
On the monitor screen will be displayed where you
must enter the value of the weights to be fitted.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
Press button
Press buttons
the total weight to be fitted.
After choosing the value of the weights to be fitted,
press button
plication of the 1st clip weight.
to shift to the
Fit the clip weight of the chosen value at 12 o'clock on
the outside of the wheel. Press again button
position the wheel for the fitting of the 2
1297-M007-1_R
Page 38 of 60
to select the outer weight to edit.
or to increase or decrease
THE BLUE VALUE INDICATES
WHICH VALUE IS ACTIVE AND YOU
ARE EDITING.
T H E H I G H E R T H E C H O S E N
WEIGHTS VALUE IS, THE MORE
THEY WILL BE SPACED.
to position the wheel for the ap-
THE TWO GREEN ARROWS INDI-
CATE THAT THE WHEEL IS PROP-
ERLY POSITIONED FOR THE AP-
PLICATION OF THE 1ST WEIGHT.
GB
to
clip weight.
nd