Motorbike Mode Wheel Balancing - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.

14.11 Motorbike Mode wheel balancing

By enabling the "motorbike wheel balancing" func-
tion, the wheel balancers can also balance motorbike
wheels.
Before detecting the wheel sizes (see Par. 14.2.2), se-
lect motorcycle wheel balancing mode proceeding as
described below:
press button and then button
screen that appears, press the button
to programs and measurements acquisition selection
screen below.
Use the arrows
mode. At the end press push button
chine will be configured as follows to perform the
measurement in the desired mode and on the screen
will appear an indication showing the measures that
will be acquired.
The "motorcycle" mode automatically recalculates the
wheel distance measurement, increasing this by the
length of the optional extension GAR181 A1.
To fit the extension (Fig. 55 ref. 2), first press the
threaded ring nut (Fig. 55 ref. 1) in the hole provided
and then screw the plastic terminal (see Fig. 55).
THE EXTENSION WILL ONLY
HAVE TO BE SCREWED UP WHEN
BALANCING IS PERFORMED IN
"MOTORBIKE" MODE.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
. On the
to switch
or to select the wished
. The ma-
Balancing procedures are identical for both modes
(car/motorbike).
By selecting motorbike mode, besides DYNAMIC bal-
ancing (see Par. 14.7.4) STATIC balancing and/or ALU-
S (Par. 14.7.1 and/or 14.7.5) can also be performed.
1297-M007-1_R
Page 44 of 60
Fig. 55
1
2
GB