Gauge Calibration - Ravaglioli G3.140R Instruction Manual

RAVAGLIOLI S.p.A.
APPLY THE WEIGHT AT A POINT
IN WHICH BOTH SIDES OF THE
RIM THERE IS THE POSSIBILITY
OF APPLYING A CLIP WEIGHT OF
100 g.
- Apply the weight and position it perfectly to the "12
o'clock".
- Press the button
form the 2nd spin of the wheel (100 g weight placed
on the outside of the wheel).
- At the end the following screen will appear on the
monitor, suggesting to remove the weight of 100 g
previously applied on the outer side and apply it on
the inside of the rim.
- Turn manually the wheel until you have the weight of
100 g on the outer side at "12 o'clock".
- Press the brake pedal and hold it down during the
whole the following operation to avoid unexpected
rotation of the spindle.
- Remove the weight from 100 g from the outside of the
wheel and apply it on the inner side at "12 o'clock".
- Close the guard to perform the 3rd spin of the wheel
(100 g weight placed on the inside wheel).
At the end of the rotation, the video screen below will
be displayed to indicate that the operation is finished.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G3.140R - GP3.140R - G3.140RS - GP3.140RS
and close the guard to per-
WHEN THE OPERATION IS CON-
CLUDED, REMOVE THE WHEEL
FROM THE MANDREL AND PER-
FORM A COMPLETE CALIBRATION
PROCEDURE Ø MANDREL AS DE-
SCRIBED IN PAR. 15.2.1.

15.2.3 Gauge calibration

Press the button
page on the monitor:
1
KEY
1 – Distance-diameter caliper calibration
2 – External data gauge calibration
Distance-diameter caliper calibration
Press the button
page on the monitor:
1297-M007-1_R
Page 50 of 60
to display the following screen
2
to display the following screen
GB