Haier Z3000B User Manual page 54

Problem
No time settings
No display of caller ID
Failure to access a feature
Failure to send a text
message
You cannot turn on the
phone.
You cannot answer
incoming calls.
The screen prompts a SIM
card error.
The screen prompts an
IMSI code error.
The screen prompts you to
insert your SIM card.
Version 3 October 2003
Compliance: Q/02 HTX001-2002
Your phone has a standby battery powered by the main
battery. If the main battery is removed, a fully charged
standby battery can stand up to seven hours. Remove the
battery before your phone is turned off may lead to loss of
information like time settings too.
This feature is network dependent. Contact your service
provider.
Many of the features are network dependent. Contact your
service provider for details.
Text message feature is not available in all networks.
Contact your service provider for details.
Remove the battery first. Check if the connector is in good
condition. Install the battery again and make sure it is in
good contact with the phone. Charge the battery to full. Try
again.
Check if call forward or call barring is activated. If yes,
deactivate it.
The SIM card may be damaged. Contact your service
provider.
Contact your service provider.
Make sure your SIM card is properly inserted.
If problem remains uncorrected, the SIM card may be
damaged. Contact your service provider.
Remedy