External Sms Control - 2N VoiceBlue Next User Manual

4.8 External SMS Control

If this function is enabled for the active Telnet session, the GSM gateway
automatically sends information on an incoming SMS message. An SMS message can
also be sent using special commands.
AT
AT!G=A6
AT!G=A55
AT^MS=ch
AT^MI=ch
AT^SX=ch
ST^SR=ch,ix
AT^SD=ch,ix
AT^SM=ch,len,pdu,csum
AT^SG=grp[/id],len,pdu,csum
AT^SS=ch,mem
SMS Storages
Siemens / Cinterion:
Ericsson:
Wavecom:
Huawei:
SierraWir.:
Motorola:
(SM = SIM card, ME = module, SR = status report memory, IM = inbox memory)
Command
1=SM, 2=ME, 3=ME
1=SM, 2=ME, 3=ME
1=SM, 2=ME, 3=SR
1=SM, 2=SM, 3=SM
1=SM, 2=ME, 3=SR
1=IM, 2=IM, 3=IM
External SMS Control
Description
„basic keep alive‟ command (answer „OK‟)
Activation of SMS control
(can be activated only in one session at same
time)
Deactivation of SMS control
GSM module [ch] status
GSM module [ch] info
Request to list all SMS messages and status
confirmations saved in the SIM card / GSM
module. Possible answers: *smserr(busy,list) or
*smsinc (ix=1-255) for each saved SMS or status
SMS. End of list or empty storage -
*smsinc(ix=0), or *smserr 255
Request to read an SMS message or SMS status
saved on the SIM card. Possible answers: *smserr
(busy,read) or *smspdu
Request to delete an SMS message (or SMS
status message). Possible answers: *smserr
(busy,delete) or *smsdel
Request to send a message via GSM module 0..31
or via any GSM module (ch=32). Possible
answers: *smserr (busy,write) or *smsout
Request to send an SMS message via GSM
outgoing group 1..8. Possible answers: *smserr
(busy,write) or *smsout
Command for an SMS storage change. Ch (0-31)
= module number. Mem (1;2;3) = SMS storage
type
4.8
83