Connector Lay-Out (4-Channel Version); Status Led Indicators - 2N VoiceBlue Next User Manual

Connector Lay-Out (4-Channel Version)

The following connectors are mounted on the 2N
 10/100BaseT Ethernet connector with PoE support
 RESET button – press for a short time to restart the GSM gateway and for a
long time to restart the GSM gateway and download the factory settings.
 Antenna connector for all GSM/UMTS channels
 SIM holder
Find a power supply connector (DC Jack 2.1mm) and type plates at the rear.

Status LED Indicators

®
The 2N VoiceBlue Next states are indicated by LEDs on the front and system
connector sides. For the LED types see the table below.
Before You Start
®
VoiceBlue Next bottom:
2.1
15