GE AF-600 FP Operating Instructions Manual page 51

Status Messages
Start delay
Start fwd/rev
Stop
Trip
Trip lock
7 7
48
AF-600 FP Operating Instructions
Operation Status
In F-24 Holding Time, a delay starting time was
set. A start command is activated and the
motor will start after the start delay time
expires.
Start forward and start reverse were selected
as functions for two different digital inputs.
The motor will start in forward or reverse
depending on which corresponding terminal is
activated.
The drive has received a stop command from
the keypad, digital input or serial communi-
cation.
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, the
drive can be reset manually by pressing
[Reset] or remotely by control terminals or
serial communication.
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, power
must be cycled to the drive. The drive can
then be reset manually by pressing [Reset] or
remotely by control terminals or serial
communication.