JAI CM-140GE User Manual page 2

Digital monochrome / color progressive scan gige vision camera
Hide thumbs Also See for CM-140GE:
Table of Contents

Advertisement

CM-140GE / -RA/-UV / CB-140GE / -RA
T
he material contained in this manual consists of information that is proprietary to JAI Ltd.,
Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty
for the use of its product and assumes no responsibility for any errors which may appear or for
damages resulting from the use of the information contained herein. JAI Ltd., Japan reserves the
right to make changes without notice.
Company and product names mentioned in this manual are trademarks or registered trademarks of
their respective owners.
For information about the warranty, please contact your factory representative.
As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC
(Electromagnetic compatibility), JAI Ltd., Japan declares that CM-140GE, CB-140GE, CM-140GE-
RA ,CB-140GE-RA and CM-140GE-UV comply with the following provisions applying to its standards.
EN 61000-6-3 (Generic emission standard part 1)
EN 61000-6-2 (Generic immunity standard part 1)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party
responsible for FCC compliance could void the user's authority to operate the
equipment.
Notice
Warranty
Certifications
CE compliance
FCC
Warning
KC
- 2 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cb-140ge-raCm-140ge-raCb-140geCm-140ge-uv

Table of Contents