MikroTik RouterBOARD 1200 Quick Setup page 2

Extension Slots and Ports

Ten 10/100/1000 (Gigabit) Ethernet ports, supporting automatic cross/straight cable correction (Auto
MDI/X), so you can use either straight or cross‐over cables for connecting to other network devices.

DB9 RS232C asynchronous serial port.

SODIMM memory slot, populated with 512MB DDR2 667MHz SODIMM memory, supports up to 2Gb RAM
modules that match these specifications. Due to a hardware limitation, only 1.5Gb will be used from a
2Gb module.
Operating System Support
Currently tested operating system is MikroTik RouterOS (starting from version 5.0).
Copyright and Trademarks. Copyright MikroTikls SIA. This manual contains information protected by copyright
law. No part of it may be reproduced or transmitted in any form without prior written permission from the
copyright holder. RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All
trademarks and registered trademarks appearing in this manual are the property of their respective holders.
Hardware. MikroTik warrants all RouterBOARD series equipment for the term of fifteen (15) months from the
shipping date to be free of defects in materials and workmanship under normal use and service, except in case of
damage caused by mechanical, electrical or other accidental or intended damages caused by improper use or due
to wind, rain, fire or other acts of nature.
To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization)
procedure. Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMA
process.
1. If you have purchased your product from a MikroTik Reseller, please contact the Reseller company
regarding all warranty and repair issues, the following instructions apply ONLY if you purchased your
equipment directly from MikroTik in Latvia.
2. We do not offer repairs for products that are not covered by warranty. Exceptions can be made for
RB1000, RB1100 and RB1200.
3. Out‐of‐warranty devices and devices not covered by warranty sent to Mikrotikls will be returned to the
sender at sender's cost.
RMA Instructions are located on our webpage here: http://rma.mikrotik.com
Manual. This manual is provided "as is" without a warranty of any kind, expressed or implied, including, but not
limited to, the implied warranty of merchantability and fitness for a particular purpose. The manufacturer has
made every effort to ensure the accuracy of the contents of this manual, however, it is possible that it may
contain technical inaccuracies, typographical or other errors. No liability is assumed for any inaccuracy found in
this publication, nor for direct or indirect, incidental, consequential or other damages that may result from such
an inaccuracy, including, but not limited to, loss of data or profits. Please report any inaccuracies found to
support@mikrotik.com
See www.routerboard.com for more information. Contact support@mikrotik.com for support questions. rev. A (6-Jan-2011)