Table of Contents
Advertisement
o Verify that the markings on the label are consistent with the application.
o Verify that the air supply pressure can not exceed the marking on the label.
Model Number Description of SVi1000
3
The SVi1000 model numbers approved for the use in potentially explosive atmospheres are shown
in the following table. Model codes are:
SVi1000 abc
Where:
a = none, SW or PR
b = none or G
c = none or IM
MODEL
SVi1000
SVi1000 /SW
SVi1000 /G
SVi1000 /SW/G
SVi1000 /IM
SVi1000 /G/IM
SVi1000 /SW/IM
SVi1000 /SW/G/IM
SVi1000 /PR
SVi1000 /PR/G
SVi1000 /PR/IM
SVi1000 /PR/ G/IM
Classification Specific Requirements
4
4.1 Class I Division 2 (Non-Incendive Equipment)
Explosion Hazard Warning: Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
4.2 Group II Category 1 (Zone 0)
For operation in hazardous area group II category 1, over voltage protection of the electrical
connections need to be installed according to EN60079-14.
Copyright 2015 as an unpublished trade secret. This document and all information herein is the property of Dresser Flow
Technologies, Dresser Inc. It is confidential and must not be made public or copied and is subject to return upon demand.
© 2016 General Electric Company. All rights reserved
DESCRIPTION
SVi1000 Assembly
SVi1000 Assembly with switches
SVi1000 Assembly with gauges
SVi1000 Assembly with switches and gauges
SVi1000 Assembly with integrated magnet
SVi1000 Assembly with gauges and integrated magnet
SVi1000 Assembly with switches and integrated magnet
SVi1000 Assembly with switches, gauges, and integrated
magnet
SVi1000 Assembly with position retransmit
SVi1000 Assembly with position retransmit and gauges
SVi1000 Assembly with position retransmit with integrated
magnet
SVi1000 Assembly with position retransmit, gauges and
integrated magnet
ES-761 Rev F
.
Page 5 of 12
Masoneilan SVi1000 Positioner Quick Start Guide =| 77
GE Oil & Gas
Advertisement
Table of Contents
