Appendix A. Svi1000 Theory; Introduction; Svi1000 Setups - GE SVi 1000 Masonelian Quick Start Manual

Appendix A. SVi1000 Theory

Introduction

The SVi1000 provides for reliable operations of control valves with utmost simplicity in setup and
commissioning. It is uniquely equipped with a non-contact travel sensor allowing for accurate
positioning and maintenance free operations. The pneumatic train of the SVi1000 is a dual-stage
amplification system with stainless steel wetted parts for durability. Using HART
FDT-DTM technologies, the Masoneilan SVi1000 positioner provides interoperability with leading
control systems suppliers.

SVi1000 Setups

A typical system setup is shown in Figure 37, General Purpose Installation schematic.
Wiring diagrams are generalized, actual wiring must adhere to electrical installation section of
manual and local electrical codes.
For information and diagrams to install the SVi1000 when located in a hazardous area protected
by Intrinsically Safe wiring practices, refer to ES-761 the Intrinsically Safe Wiring Requirements
section ( "Hazardous Location Installation and Declaration of Conformity" on page 72).
© 2016 General Electric Company. All rights reserved
SVi1000
Non-Hazardous Area
Figure 37 General Purpose Installation
HART
Modem
GE DPI620
. Masoneilan SVi1000 Positioner Quick Start Guide =| 59
®
Power
Supply
220 Ohms
HART compliant
control system
output card
ValVue
eDDL and