GE SVi 1000 Masonelian Quick Start Manual page 25

Tools required:
To mount the SVi1000:
1. Attach the mounting bracket to actuator (Figure 9).
Mounting
Bracket
Long Side
Flat Head Socket Cap Screw, 5/
16"-18UNC X 0.62" Long
2. Bolt the extension shaft to the valve position take-off shaft (Figure 10).
Magnet
Holder
Assembly
Extension
Shaft
Valve Position
Take Off
Shaft
Figure 10 Extension Shaft to the Valve Position Take-off Shaft
© 2016 General Electric Company. All rights reserved
M5 Hex Key
M3 Hex Key
Valve Position Take
Off Shaft
Figure 9 Rotary Mounting Bracket to Valve Actuator
M4 Hex Key
Mount the long end of the mounting
bracket to the left when facing the
actuator, if possible.
. Masoneilan SVi1000 Positioner Quick Start Guide =| 25
Mounting
Holes
Tighten the
M4 screw
(one shown)
Install with a
flat head socket
cap screw,
1/4"-28 UNF