GE SVi 1000 Masonelian Quick Start Manual page 16

Failsafe Mode
Commission
Processes
16 | =GE Oil & Gas
Perform a Manual Find Stops
Set Valve Position
When a fault results in Failsafe mode being activated, the output
pressure of the SVi1000 is set low and the red status LED illuminates
continuously. If the fault is considered self-clearing, then once cor-
rected, the unit returns to Normal mode. If the fault is not self-clear-
ing, then the unit requires a reset after correcting the failsafe
condition.
These are temporary states activated when a local user interface
issued command dictates their use. When the positioner is in a Com-
mission Processes a status light indicates this activity (see "LED Light
Functions" on page 17). Examples of Commission Processes are Auto
Find Stops and Auto Tune. Once a task completes the unit returns to
Normal mode.
Set Open Stop Adjustment
Command valve to full open or
closed
© 2016 General Electric Company. All rights reserved
.