Valvue Software And The Svi1000; Valvue Overview; Valvue And Svi1000 Dtm Trial Version - GE SVi 1000 Masonelian Quick Start Manual

Table of Contents

5. ValVue Software and the

SVi1000

This section generally discusses the ValVue software that can be used to configure the SVi1000

from a HART

configured laptop.

You must download the ValVue software and the SVi1000 DTM software, then install to configure

and use the SVi100. See "ValVue and SVi1000 DTM Software Installation" on page 52.

The SVi1000 DTM software and the ValVue software comes with a trial version of ValVue. For 60

days after the initial installation, The ValVue software provides the FDT frame capability in which

the SVi1000 DTM software operates. The SVi1000 DTM software provides the capability of con-

figuring, calibrating, diagnosing, trending and much more. After the 60 day trial period ValVue

must be registered for continued use.

A cloning feature is available for the SVi1000 positioner.

NOTE

Cloning transfers the configuration and calibration

parameters from one device to another. Cloning operations

are to be performed only by GE personnel or qualified

channel partners trained on properly performing the cloning

function. This feature is not available during normal ValVue

operation. Contact GE or a channel partner for more

information.

Masoneilan SVi1000 Positioner Quick Start Guide =| 51

Table of Contents