Raise3D N2 Dualdirect - Bondtech Raise3D N1 Assembly And Installation Manual

Raise3D N2 DualDirect

• DualDirect and
SingleDirect have
separate installations
guide. Go to page 14 for
the SingleDirect guide.
Following chapter is the
installation guide for
Raise3D DualDirect.
• There are currently 2
versions of the printhead
carrier existing, you need
to identify what version
your printer has.
• The shims are marked
with the appropriate
revision.
• Place the correct shim on
the rear mount.
• Firmly press down the
DualDirect extruder.
Support the printhead from
underneath to avoid
deflection of the linear
shafts.
Installation manual Bondtech Raise3D V2.0 7