Bondtech Raise3D N1 Assembly And Installation Manual page 11

• Install the cable chain, use
• If you have the Raise3D
• Connect the cable marked
• Connect the cable marked
Installation manual Bondtech Raise3D V2.0
the old screws (2mm hex
wrench).
machine with SILVER
MOTORS, use the
supplied adapter to
connect the motors and
follow the guide below.
Scroll down 4 pictures to
find the guide for the
BLACK MOTORS.
SILVER MOTOR
with "L" to the front motor.
Use the adapter that has
wires reversed, "L".
with "R" to the rear motor.
Use the adapter that has
straight wires, "R".
10