Table of Contents
Advertisement
• Arrange the cables nicely
• If you have the black
• To reverse two cables, you
• Like this!
Installation manual Bondtech Raise3D V2.0
and use cable tie to secure
them on the top. Cut of the
end.
You are done with the
installation!
BLACK MOTOR
motors you will have to
change position of the two
outermost wires in the "R"
connector to change the
rotation direction. Note
that it's only the rear motor
connector.
can use a sharp tool to lift
the little plastic tab on the
connector and gently pull
the crimping contact out of
the housing with your
fingers.
11
Advertisement
Table of Contents
