Location/Service Access - Daikin SWP Series Installation Manual

Location/Service Access

To facilitate installation and provide service, and maintenance
access, follow the recommended clearances in
Minimum clearances required by local, state, or federal codes
such as the NEC take precedence over those listed below .
Clearance is required to allow room for filter access, mechanical
cleaning of the condenser tubes and economizer coil, access to
expansion valves and other control components, and to allow for
possible fan shaft or compressor removal .
Figure 3: Recommended Service and Maintenance Clearance
www .DaikinApplied .com
Table 2 .
WATER SUPPLY
Table 2: Recommended Clearances
Location
Control panel
Unit rear, filter section
Access side
Unit front
Opposite access side
WATER RETURN
5 IM 1032-2 • Self-Contained Air Conditioning Systems
I
nsTallaTIon
Clearance Length, inches (mm)
42 (1067)
24 (610)
36 (914)
36 (914)
18 (457)
30