In-Warranty Return Material Procedure; Warranty Return Material Procedure - Daikin SWP Series Installation Manual

In-Warranty Return Material
Procedure
Material other than compressors may not be returned except
by permission of authorized factory service personnel of Daikin
Applied at Minneapolis, Minnesota .
A "return goods" tag will be sent to be included with the
returned material . Enter the information required on the tag to
expedite handling at our factories and to expedite issuance of
credits . All parts shall be returned to the factory designated on
the return goods tag, transportation charges prepaid .
The return of the part does not constitute an order for
replacement . A purchase order for the replacement part must
be entered through your nearest Daikin Applied representative .
The order should include the component's part number and
description and the model and serial numbers of the unit
involved .
If it is determined that the failure of the returned part is due to
faulty material or workmanship within the standard warranty
period, credit will be issued on the customer's purchase order .
Consult your local Daikin Applied Representative for warranty
details. Refer to Form 933-430285Y. To find your local Daikin
Applied Representative, go to
www .DaikinApplied .com .
IM 1032-2 • Self-Contained Air Conditioning System
s
ervICe and
Warranty Return Material
Procedure
Defective material may not be returned without permission
of authorized factory service personnel of Daikin Applied
(Minneapolis, Minnesota, 763-553-5330) . A "Return Goods"
tag must be included with the returned material . Enter the
required information to expedite handling and prompt issuance
of credits . All parts must be returned to the appropriate
Daikin Applied facility, designated on the "Return Goods" tag .
Transportation charges must be prepaid .
The return of the part does not constitute an order for
replacement . Therefore, a purchase order must be entered
through the nearest Daikin Applied representative . The order
should include part number, model number, and serial number
of the unit involved .
Credit will be issued on customer's purchase order following
an inspection of the return part and upon determination that
the failure is due to faulty material or workmanship during the
warranty period .
48
W P
arranTy roCedure
www .DaikinApplied .com