Auto Power On/Off; Change The Data Logger Sampling Time; To Show The Balance Data Numbers In The Memory - Lutron Electronics CD-4322 Operation Manual

5-3 Auto power On/Off

( Lower display show " OFF " )
a. Use " button " ( 3-3, Fig. 1 ) to select " YES " or " no ".
▲
* YES : Auto power off.
* no : Auto power disable, it is the manual power off.
b. After select the desiring function ( YES or no ), press the
" Enter button " ( 3-4, Fig. 1 ) to save the function with
default.

5-4 Change the data logger sampling time

( Lower display show " SP-t " )
a. Use " button " ( 3-3, Fig. 1 ) to select
▲
data logger sampling time to
0, 1, 2, 5, 10, 30, 60, 600, 1800, 3600 seconds
b. After the sampling time value is determined, press the
Enter button " ( 3-4, Fig. 1 ) to save the sampling
time with default.
Note :
Set the sampling time to 0 second is used
for the manual Data Logger function.
5-5 To show the balance data numbers in the
memory
( Lower display show " SPACE " )
The display will show the balance data no. that exist
into the memory ( allow memorize data no. ).
12