Table of Contents
Advertisement
15.
Browse to a website to confirm the device has Internet access.
Setting Up a Serial Device
1.
Connect the serial device to the PC.
2.
Navigate to Control Panel > Device Manager. Make note of the COM port number for the connected
device (in COM Ports).
Example: COM port is COM31.
3.
In the Action drop-down menu, select Add legacy hardware to add a new device.
4.
Navigate through Add Hardware Wizard.
a.
Click Next on the Welcome page.
b.
Select Install the hardware that I manually select from a list, then click Next.
c.
Select Modems, then click Next.
d.
Check Don't detect my modem; I will select it from a list, then click Next.
e.
Select Have Disk, then click Next.
®
QuickCarrier
USB-D MTD-MAT1 User Guide
USING CONNECTION MANAGER
17
Advertisement
Table of Contents
