Table of Contents
Advertisement
Chapter 1 – Product Overview
Overview
The QuickCarrier™ USB-D (MTD-MAT1) is a cellular dongle designed and built for machine-to-machine M2M
communications specifically for AT&T networks. This packaged device can be connected directly to any USB port
on a laptop, desktop computer, and other mobile devices.
The MTD-MAT1 allows access to wireless broadband for a variety of M2M applications. The dongle was designed
to withstand extended use. With implementation of LTE Cat M1 cellular technology, the MTD-MAT1 is accepted by
developers as a reliable low-power device that brings 4G LTE capabilities to an assortment of Internet of Things
(IoT) devices that are used to connect and exchange data. The MTD-MAT1 quickly became an integral part of the
MTD Series product-line from MultiTech.
Documentation
The following documentation is available on the MultiTech website at
http://www.multitech.com/brands/quickcarrier-usb-d.
Document
QuickCarrier™ USB-D MTD-MAT1
User Guide
USB Driver Installation Guide for
LTE Devices
Telit ME910C1, AT Commands
Reference Guide
MTD-MAT1 Specifications
Category
General
Frequency Band
Device bandwidth:
Cat M1 Speed
Data Speed
Maximum transmit power
Interface, Antenna, SIM Holder
USB Interface
Antenna
SIM Holder
®
QuickCarrier
USB-D MTD-MAT1 User Guide
Description
Provides an overview, product specifications, safety and
regulatory information, SIM card installation instructions,
and basic end-user operation instructions.
Provides instructions for installing USB drivers on Linux and
Windows.
Provides AT commands and parameters used to configure
your device.
MTD-MAT1
4G Bands (MHz): B2 (1900); B4 (1700) AWS; B12 (700)
1.4MHz for both downlink and uplink
Half duplex mode: 300 kbps downlink; 375 kbps uplink
Full duplex mode: Not applicable
20 dBm
USB 2.0 high speed compatible, Type A
Internal
Standard Mini SIM 1.8/3Volt
PRODUCT OVERVIEW
Part Number
S000675
S000616
80529ST10815
A
5
Advertisement
Table of Contents
