Silvercrest ADR 1300 B3 Operating Instructions Manual page 10

Assembling the squeegee
1) Open the large screw on the retainer of the squeegee q, such that you can
push in the metal rail with the rubber lip.
2) Thereby ensure that the broad side of the metal rail is at the top.
3) Retighten the large screw.
Using the appliance
WARNING! RISK OF INJURY!
To ensure faultfree operation and a long service life for the
appliance, pay heed to the following instructions:
First press the steam lever 1 when the green control lamp 7 glows. If you
►
press too early it may cause an accumulation of hot water in the appliance,
which will drip or spray from the nozzle. There is a risk of being scalded.
► Before switching the appliance off , always allow all of the steam to drain
out by pressing the steam lever 1 until no more steam exits from the nozzle.
Filling / refi lling with water
RISK OF ELECTRIC SHOCK
► Always disconnect the plug from the mains power socket before you add
water to the water tank 3!
1) Turn the water tank 3 such that the marking on the water tank points to the
open lock
the appliance.
2) Open the lid of the water tank 3.
WARNING - PROPERTY DAMAGE!
Do not put any additives or cleaning agents in the water tank 3!
►
3) Fill the water tank 3 with water. Ensure that you never fi ll the tank with
more water than up to the MAX marking, and never less than up to the
MIN marking.
Should the mains water at your locality be rated as hard, it is recommended that
you mix the mains water with distilled water. Otherwise, the appliance could
calcify prematurely and clog the steam nozzle 0.
ADR 1300 B3
on the appliance. The water tank can then be detached from
GB
IE
CY
7