Table of Contents
Advertisement
Clean Up
The unpainted surfaces are coated with a
waxy oil to prevent corrosion during
shipment. Remove this protective coating
with a solvent cleaner or degreaser. For
thorough cleaning, some parts must be
removed. For optimum performance,
clean all moving parts or sliding contact
surfaces. Avoid chlorine-based solvents,
such as acetone or brake parts cleaner that
may damage painted surfaces. Always
follow the manufacturer's instructions
when using any type of cleaning product.
WARNING
The oil on the pulley Must
be clean, otherwise the
slipping of the belt will
cause damage to the motor.
Installation Dimensions
The size of the installation hole of lathe see
Figure 2 , Please use the bolts of M12 or
1/2" fixing it.
Figure 2 Installation Dimensions
11
Advertisement
Table of Contents
