Quick Boot - MSI MS-5156 Manual

Description of the item on screen follows:
1st Boot Device/2nd Boot Device/3rd Boot Device/
4th Boot Device
This option sets the sequence of boot drives.
The settings are:
IDE0
IDE1
IDE2
IDE3
F(optical)
SCSI
Network
CD-ROM
Disable
Try other Boot Devices
This option sets the device boot, if all the Four Boot Devices failed.

Quick Boot

Set this option to Enabled to permit AMI
seconds. This option replaces the old ABOVE 1 MB Memory Test option.
The Optimal default setting is Enabled. The Fail-Safe default setting is
Disabled.
Boot up Num Lock
When this option is set to Off, AMI
key when the system is powered on so the end user can use the arrow keys
on both the numeric keypad and the keyboard. The settings are On or Off.
The optimal default and Fail-Safe default settings are On.
Floppy Drive Seek
When this option is set to Enabled, AMI
command on floppy drive A: before booting the system. The settings are
Enabled and Disabled. The Optimal and Fail-Safe default settings are
Disabled.
The system will boot from the first HDD.
The system will boot from the Second HDD.
The system will boot from the Third HDD.
The system will boot from the Fourth HDD.
The system will boot from LS-120(120M Floppy).
The system will boot from the SCSI.
The system will boot from the Network drive.
The system will boot from the CD-ROM.
Disable this sequence.
®
4-6
®
®
BIOS to boot within 5
BIOS turns off the Num Lock
®
BIOS performs a Seek