Onboard Parallel Mode; Usb Controller - MSI MS-5156 Manual

Onboard Parallel Mode

SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/(EPP/SPP)/
ECP(ECP/EPP)

USB Controller

Enabled/Disabled
To operate the onboard parallel port as
StandardParallel Port only, choose
"SPP." To operate the onboard parallel
port in the ECP and SPP modes simulta-
neously choose "ECP/SPP." By
choosing "ECP", the onboard parallel
port will operate in ECP mode only.
Choosing "ECP/EPP" will allow the
onboard parallel port to support both the
ECP and EPP modes simultaneously.
The ECP mode has to use the DMA
channel, so choose the onboard parallel
port with the ECP feature. After select-
ing it, the following message will appear:
"ECP Mode Use DMA" At this time the
user can choose between DMA
channels 3 or 1. The onboard parallel
port is EPP Spec. compliant, so after the
user chooses the onboard parallel port
with the EPP function, the following
message will be displayed on the screen:
"Parallel Port EPP Type." At this time
either EPP 1.7 spec. or EPP 1.9 spec. can
be chosen.
Choosing Enabled, will enable the on-
board USB port.
3-32
®