Quick Boot - MSI MS-6309 Manual

Description of the item on screen follows:

Quick Boot

Set this option to Enabled to permit AMI
seconds. This option replaces the old ABOVE 1 MB Memory Test option.
The Setup default setting is Enabled. The BIOS default setting is Disabled.
1st Boot Device/2nd Boot Device/3rd Boot Device
This option sets the sequence of boot drives.
The settings are:
Disabled
IDE-0
IDE-1
IDE-2
IDE-3
Floppy
ZIP A:/LS120
Atapi ZIP C:
CDROM
SCSI
Network
Initial Display Mode
Set this option to BIOS mode for normal boot-up. Silent mode to
show the MSI logo during system boot-up. The settings are BIOS or Silent.
Disable this sequence
The system will boot from the first HDD.
The system will boot from the Second HDD.
The system will boot from the Third HDD.
The system will boot from the Fourth HDD.
The system will boot from Floppy.
The system will boot from LS-120 (120M Floppy).
The system will boot from the ZIP.
The system will boot from the CD-ROM
The system will boot from the SCSI.
The system will boot from the Network drive.
3-6
®
®
BIOS to boot within 5