Hardware Installation; Cpu Installation Procedures - MSI MS-5156 Manual

Chapter 2

HARDWARE INSTALLATION

The MS-5156 mainboard operates with Intel
®
Pentium processors with MMX
6x86MX and AMD
3.52V processors. The mainboard provides a 321-pin ZIF Socket 7 for easy
CPU installation, a DIP switch (SW1) to set the proper speed for the CPU
and a Jumper block (JV2 - JV5) for setting the CPU voltage. The CPU
should always have a cooling fan attached to prevent overheating.

2.1-1 CPU Installation Procedures

1. Pull the lever sideways away
from the socket. Then raise
the lever up to a 90-degree
angle.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CPU. Match
Pin 1 with the white dot/cut
edge. Then, insert the CPU.
It should insert easily.
3. Press the lever down to
complete the installation.
TM
®
K5/K6 processors. It could operate with 2.8V to
®
Pentium
technology, Cyrix
Sliding
Plate
2-1
®
processors/
®
6x86/6x86L/
Open Lever
Pin 1
White dot/
CPU
Cut edge
Close
Lever
CPU