Kioti EX35 Owner's Manual page 60

(2) CRUISE CONTROL
Cruise Control is designed for tractor
operating efficiency and operator
comfort. This device will provide a con-
stant forward operating speed by me-
chanically holding the speed control
pedal at the selected position.
[To Engage Cruise Control]
1. Accelerate speed to desired level
using Forward Pedal, and pull the
cruise control switch up to the "ON"
position.
2. Release Forward Pedal and desired
speed will be maintained.
[To Disengage Cruise Control]
1. Place the lever to the off position.
Or depress the brake pedal.
NOTE
Make sure to keep the cruise con-
trol in the "OFF" position when
starting the tractor.
Return the cruise control to the "OFF"
position when stopping the tractor.
The cruise control can be released
when overloads or any sudden
forces are encountered.
Cruise control disengage if the
brakes are applied
IMPORTANT
To prevent the damage to cruise
control, do not depress the re-
verse pedal when the cruise
control is engaged.
! ! ! ! !
CAUTION
To avoid personal injury and
maintain optimum control of
tractor, do not use the cruise
control at high speeds or when
driving the tractor on roads.
Speed set device will not oper-
ate in reverse on road.
OPERATION
STOPPING
1. Slow the engine to idle
2. Depress the clutch and brake pedal.
(Manual model)
3. After the tractor has stopped, disen-
gage the PTO, lower the implement,
shift the transmission into neutral,
release the clutch pedal and set the
parking brake.
5
-21